When you need to connect to ALL the networks
With most laptops ditching the Ethernet port nowadays it has become increasingly common to carry around some USB Ethernet dongle(s) to get that sweet sweet wired juice.
This quickly becomes a hassle whenever more than one network connection is required - now we often have to bring a USB hub and a few dongles on every assignment just to be sure.
A simpler solution
The Manifold simplifies connectivity by including three Ethernet ports in a single device. It relies on the LAN9500A chipset for which drivers are included in all modern operating systems. No installation required - just plug the Manifold and connect to whatever you need.
Each port is an individual 10/100 USB Ethernet dongle with its own MAC address so you can enjoy access to multiple networks without the hassle.
The Manifold is shipped with a basic 3D-printed press-fit enclosure. This means you can easily remove the case and print your own, or even integrate the Manifold board directly into something else.
STL files for the included case are provided below, ready to be 3D-printed.
Two files are provided - one for the bottom of the enclosure and one for the top.
What's the blurred orange sticker on the first picture?
Your three MAC addresses. Every Manifold includes three unique MAC addresses (one for each port). These are printed on an orange sticker label which is applied before shipping. You can keep it on or remove it, but you will receive the device with the sticker already on.
- Manifold (main board)
- Plastic case (green)
- 1.0M USB cable
Ethernet cables are not included!
IMPORTANT NOTE: THIS IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
IF YOU ARE PURCHASING THIS, IT IS ASSUMED YOU KNOW HOW TO USE IT AND WHAT YOU ARE DOING.
THAT BEING SAID, YOU ARE REQUIRED TO OBEY THE LAW AND ARE PROHIBITED FROM USING RINGTAIL PRODUCTS FOR ANYTHING OTHER THAN LEGITIMATE PURPOSES.
RINGTAIL WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED AS A RESULT OF USING OUR PRODUCTS.