Basilisk Zero - Automatic Ethernet Ghosting

  • Sale
  • Regular price SFr. 480.00
Tax included. Shipping calculated at checkout.


A smaller Basilisk

The Basilisk is the ultimate Ethernet Ghosting tool, providing an automatic, transparent solution to simplify network intrusion. 

However, its size and power requirements can be a disadvantage in certain situations.

The Basilisk Zero packs the same functionality in a smaller form factor while also working from a much more flexible 5V/1A power supply. Run it from a USB power bank via the included USB power cable for maximum mobility.

To achieve this, the Zero relies on a software engine. This naturally incurs a slight delay in packet processing. No need to worry however: while network throughput will never be as high as with the classic Basilisk, the Zero's 300MHz dedicated 32bit processor achieves high-enough performance that you won't even notice it's there.

Specially designed for mobility

The reduced footprint of the Zero makes it less of a hassle to carry around during engagements. Even the power supply is smaller. In fact, it is the same power supply as for the Skunk gigabit switch.

Also included with the Basilisk Zero is a USB power cable which allows running it from a laptop's USB, a power bank, or any other sufficient USB source. The Basilisk Zero will require at least 1A of current though, so make sure your host is capable of providing enough power.

What's included?

  • Basilisk Zero (main board)
  • Plastic case (green)
  • 5V 1A power supply
  • USB power cable
  • 3x Cat6 cable (1m)

Please note: the power supply provided with the Basilisk Zero outputs 5V, which is not suitable for the classic Basilisk. Be careful not to use the wrong power supply with your device.

The Basilisk Zero is shipped with a basic 3D-printed press-fit enclosure. This means you can easily swap the case and print your own, or even integrate the Basilisk Zero board directly into something else.

STL files for the included case are provided below, ready to be 3D-printed.

Two files are provided - one for the bottom of the enclosure and one for the top.

 

IMPORTANT NOTE: THIS IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.

IF YOU ARE PURCHASING THIS, IT IS ASSUMED YOU KNOW HOW TO USE IT AND WHAT YOU ARE DOING.

THAT BEING SAID, YOU ARE REQUIRED TO OBEY THE LAW AND ARE PROHIBITED FROM USING RINGTAIL PRODUCTS FOR ANYTHING OTHER THAN LEGITIMATE PURPOSES.

RINGTAIL WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED AS A RESULT OF USING OUR PRODUCTS.

Customer Reviews

Based on 1 review Write a review